4
M
odel Pro S 600T “TURBO”
OPERATING IN REGULAR / EVAP MODE
•
Fill the reservoir to full level with baby oil provided. See back of
unit for fill level
Do not over fill!
•
Attach the Power Cables and Air/Smoke Hose to the
Smoke
Monster
®
Turbo
•
Attach power cables to a
fully charged
vehicle battery.
Do not
attach to a battery charger!
•
Machine will be powered up once power supply connected, and
rocker switch is in the “ON”
position. (rocker switch will be
illuminated)
•
Once unit is powered up, the 2 LEDs will blink for a few seconds.
•
After the led lights finish blinking, they will turn off, and the unit
will be in EVAP air mode.
•
By pushing the
“Smoke
Mode”
button, the LED light will be lit, and
unit is ready to start 5-minute smoke cycle.
•
Find the leaks and make necessary repairs.
OPERATING IN AIR LEAK DECAY MODE (both EVAP & TURBO)
•
Switch unit back to “Air Mode” and start pressurizing the
vehicle
•
Once vehicle is
pressurized, turn the rocker switch to the “OFF”
position and see if the pressure holds then the leak has been
repaired. If the gauge drops and the ball in the flow meter rises,
this means you have a leak and you will need to re-smoke the
vehicle.
Continued on next page
