6
PRO S-
2000HD “HEAVY DUTY”
QUICK START GUIDE
1.
Fill the reservoir with baby/mineral oil provided. See back of unit
for fill level. The oil level shall be between the minimum level and
the maximum level.
Do not over fill.
2.
Attach the air chuck connecter found in the accessory case.
3.
Attach power cables to the
Smoke Monster® Pro-S 2000HD.
4.
Attach Air/Smoke hose to the
Smoke Monster® Pro-S 2000HD.
5.
Attach shop air to the
Smoke Monster® Pro-S 2000HD.
6.
Attach power cables to a fully charged 12V or 24V vehicle battery.
Do not attach to a battery charger.
7.
Power up the
Smoke Monster® Pro-S 2000HD
using the
red
power
toggle switch on the front of unit.
8.
The unit is in “Air Mode” until you select the “Smoke Mode”.
9.
Start the smoke mode operation by pushing the chrome
“on”
button
on the front, the
red
LED light indicator should be on. This will start
the Smoke Mode for a 10-minute working cycle.
NOTE: DO NOT EXCEED 20 PSI IN “SMOKE MODE”!!!!!
10.
Adjust the test pressure using the large dial between the
gauges, the top gauge will indicate the pressure reading.
11.
You can control the amount of smoke by opening or closing the
airflow by turning the small knob (left or right) on the flow
meter.
12.
Depending on the test you want to preform use the necessary
accessories that come with the unit inside the accessory box (HD
Bladder Blocker or Radiator Kit).
13.
Unit is now ready to use for diagnostic purposes.
Continued on next page
