NOTICE:
While starting the engine, do not crank it for more than 6 second at a time.
⚫
If the vehicle does not start, allow 5-10 minutes additional charge time before making
another attempt to start the recipient vehicle engine.
⚫
If the vehicle engine does not start after the second attempt, seek professional automotive
service.
CARE AND MAINTENANCE
Storage:
Store and use this Jump Starter with Display in a cool, dry area and keep it away from
direct sunlight, heat, excessive humidity and dampness. Keep unit in storage bag when not in
use. Use caution when folding the charger cord for storage to prevent damage to the cord Do
not use the charger if the cord is damage.
Cleaning:
Do not clean or wipe the unit with solvents or chemical materials. If necessary,
remove dirt or stains using a soft cloth dampened with a mild detergent solution.
Fuse Replacement
NOTICE
:
Both the donor power plug and the recipient power plug are protected with fuses.
1. Turn the cap on the tip of the power plug counterclockwise (no tools needed).
2. Remove the cap, center pin and fuse.
3. Replace the fuse with a new 10A fuse.
4. Replace the center pin and cap. Turn the cap clockwise.
SPECIFICATIONS
1.
Input Voltage:
12-Volt DC
2.
Input Current:
4 Amp
3.
Rated Fuse:
10Amp
4.
Power Cord Length: 20ft
5.
Output Voltage:
15 Volts DC
TROUBLESHOOTING
The vehicle being jump-
started will not start
The power plugs are not
properly inserted in the 12-
Volt cigarette
lighters/accessory sockets.
Ensure that the power plug is
fully inserted into the 12-Volt
cigarette lighter/accessory
socket of the jumper vehicle
The vehicle battery is fully
discharged or damaged
Seek professional automotive
