PROEL DREAMLIGHT 1200 ECLIPSE WASH, Руководство пользователя

Страница: 30 / 52

29
CHANGING THE POWER SUPPLY SETTINGS
Electronic ballast
The operating range of the electronic ballast is 95
VAC-255 VAC. The transformer has to be set to
the local AC voltage.
If you want to change the power supply settings,
follow the instructions:
1.
Disconnect the fixture from AC power.
2. Remove the both top base covers by
loosening the 14 screws.
3.
Move the wire (3)on the transformer
connection block to the position according to the
desired voltage.
4. Close the base before applying AC power.
FITTING THE LAMP
DANGER !Install the lamps with the device switched off only.
Unplug from mains before!
To insert the lamp (MSR 1200
SA) follow this procedure:
1.
Disconnect the fixture
from power and allow it to
cool.
2. Loosen the 2 quarter-
turn fasteners marked „X,Y,” on
the lamp cover at the back of
the head.
3. Pull the lamp cover
with lamp holder out of the
head.
4. Holding the lamp by its
ceramic base, carefully pull the
lamp straight out of the lamp
socket.
5. Holding the new lamp
by its ceramics base, gently
insert the lamp to the lamp
socket. Make sure that the
lamp is installed tightly into the
lamp socket.
Do not install a lamp with a higher wattage!
A lamp like this generates temperatures the device is not designed for. Damages
caused by non-observance are not subject to warranty. Please follow the lamp