background image

Jetzt Angebot anfordern auf www.poolseller.de

»

 NOTICE DE MONTAGE

 / OCTO & OCTO +

69

>>                 

ASSEMBLING AND POSITIONING THE WOODEN LADDER (contd)

For your children’s safety !

Don’t forget to stick the safety label 

to the pool wall stating that the ladder 

must be removed while the pool is not 

in use. 

The maximum weight allowed on the 

ladder is 150 kg.

      The wooden ladder is fitted with two lever latches that lock it into position. The lever sections are fitted to the ladder 

supports and the hooks are mounted under the coping (these parts are enclosed in bag K).  Observe how these 2 parts 

interact together to understand how the mechanism works and establish the travel necessary for the ladder to be locked 

correctly into position. 

      Position the assembled ladder under the coping. Insert the blocking parts between the wooden supports and the 

coping. These should be positioned in line with the lever latches. Trace the position of the various elements. Remove 

the ladder, screw the blocking parts into position and attach the lever elements to the ladder supports. Put the ladder in 

place and lock it in position. 

       The locking mechanism might differ from that illustrated here, but will function according to the same principal. 

93

94

95

»

 INSTALLATION INSTRUCTIONS

  / OCTO & OCTO +

Jetzt Angebot anfordern auf www.poolseller.de

Содержание Piscines Bois ODYSSEA 640 BF Ht 146









































Отзывы: