PROCONCEPT PLG029, Руководство оператора, Страница: 3 / 44

v.080131
3
EN
G
LIS
H
GENEraL SafETy INSTrUCTIONS
To use this tool properly, you must observe the safety regulations, the assembly
instructions and the operating instructions to be found in this Manual. All persons
who use and service the machine have to be acquainted with this Manual and must
be informed about its potential hazards. Children should be supervised at all times
if they are in the area in which the tool is being used. It is also imperative that you
observe the accident prevention regulations in force in your area. The same applies
for general rules of occupational health and safety.
WARNING: When using gasoline powered equipment, basic safety precautions,
including the following, should always be followed to reduce the risk of
serious personal injury and / or damage to the unit. Read all these warnings
and instructions before operating this product. Save this Instruction Manual
for future reference.
1. USE THE CORRECT EQUIPMENT FOR THE JOB. Never use this unit for a
purpose for which it was not intended.
2. DRESS CORRECTLY. Wear close fitting, tough work clothing that will provide
protection, such as long slack or trousers, safety work shoes and gloves. If you
have long hair, wear a protective hair covering.
3. WEAR PROPER SAFETY EQUIPMENT. Heavy duty work gloves, hard hat, a
safety face shield, or safety glasses for eye protection and a good grade of ear
plugs or other sound barriers for hearing protection should be worn at all times
when operating this unit. The sound level emitted by this equipment can peak at
117Db and it emits 105Db during steady operation.
4. STORE AND OPERATE IN A SAFE PLACE. Open fuel cap slowly to release
any pressure which may have formed in fuel tank. To prevent a fire hazard,
move at least 3 metres (10 feet) from fueling area before starting.
5. DO NOT USE ANY OTHER FUEL than that recommended in your manual.
Always follow instructions in the fueling and refueling section of this manual.
Never use gasoline unless it is properly mixed with 2-cycle engine lubricant.
Permanent damage to the engine will result, voiding the manufacturer’s
warranty.
6. DO NOT SMOKE while refueling or operating this equipment.
DESCrIPTION Of SyMBOLS
This symbol reminds the operator to wear gloves when operating this equipment.
Hot surface.
Keep 15 metres (50 feet) away from other people
Beware of thrown objects hit by the cutting attachment. Never use without a properly
mounted guard.
Choke control “Cold Start” position (Choke Closed).
Choke control “Warm Start” position (Choke Open).
Product certified to United States Environmental Protection Agency regulations
50 ft
.
15m