Page 5
2
Safety notes
2.1 Symbols used
This note comprises instructions needed to follow directions, specifications,
proper working procedure and to avoid data loss, damage or destruction of
the instrument.
This note signifies a warning about dangers to life and limb if the apparatus
is handled improperly. Observe these notes and be particularly careful in
these cases. Also inform other users on all safety notes. Besides the notes
in this instruction manual the generally applicable safety instructions and
regulations for prevention of accidents must be observed.
2.2 Safety notes and hints
It is strictly forbidden to open the housing of the ZGM 1130! If not observed,
all the guarantee and liability claims to Proceq SA will be void.
Never unplug the USB
-
cable during data transfer.
The ZGM 1130 glossmeter is exclusively intended for measurement of all
gloss ranges from matt to high gloss up to 2’000 GU. Any other use is
considered as not being in accordance with the intentions of the
manufacturer. The manufacturer is not liable for damages resulting from
inappropriate application. The user bears the full responsibility.
Unauthorized modifications and changes of the ZGM 1130 are not permitted.
Reproduction without permission is not allowed.
All maintenance and repair work which is not explicitly permitted and
described in the present instruction manual shall only be carried out by
Proceq SA
or your authorized Proceq agent, failure to comply voids
warranty.
Proceq SA
refuses all warranty and liability claims for damages caused by
usage of the ZGM 1130 in combination with
non-original accessories
, or
accessories from 3
rd
party suppliers.
Never immerse the device in water or other liquids:
Danger of short circuit!
Never leave the ZGM 1130 under direct sun exposure. Always store the
ZGM 1130 in its carrying case.
For the operation of the ZGM 1130 apply all local safety regulations.
