Bediening
52400045 / 52400049
20 / 26
NL
5
Bediening
5.1
Algemene werking
Als het apparaat met een netvoeding wordt gebruikt, moet de netvoedingskabel
worden bevestigd aan de
netvoedingskabelhouder (1) die op de handgreep (4) is aangebracht (zie fig
. 01
)!
Dit om ervoor te zorgen dat de stekkerverbinding van het netsnoer beveiligd is tegen onbedoelde
ontkoppeling
(b.v. door onbedoeld op het snoer te stappen met als gevolg:
geen vacuüm,
→
belasting valt weg
).
Wanneer u het apparaat met draaiende motor parkeert
, moet u ervoor zorgen dat het apparaat
niet op een
dichte ondergrond staat, maar altijd van
frisse lucht
wordt voorzien (b.v. op een stuk hout).
Bij
pauzes langer dan
twee minuten moet
het toestel
worden uitgeschakeld.
Verwijder vóór het zuigen al het water van het aanzuigoppervlak. Na elke aanzuiging en het deponeren van
vochtige ladingen moet de vacuümhefinrichting gedurende minstens 3 minuten met geopende
ventilatieklep (vrije aanzuiging zonder lading) in werking worden gesteld om eventueel aanwezig vocht uit
het vacuümsysteem te verwijderen.
12.
Plaats het netsnoer (3) dat van de blazer
komt in de houder op het handvat (
).
13.
Bevestig het netsnoer aan de
netsnoerhouder (1) en steek de kabelstekker
(3) in de netsnoeraansluiting (2).
Fig. 01
14.
Om de handgreep (
) op de gewenste
werkhoogte in te stellen,
15.
trek beide veersluitingen (rechts en links van
het toestel) iets naar buiten, draai ze en laat
ze weer los tot ze vastklikken.