Installation
52400045 / 52400049
18 / 27
DE
4.2
Installation HONDA-Stromerzeuger EU 22i
Beim Installieren des HONDA-
Stromerzeugers an den Vorgesehenen Platz am Gerät „QJ
-600-
E“ muss das
Vakuumgebläse ausgeschaltet sein. Das Gerät muss komplett auf ebenem Grund auf dem Boden stehen.
1.
Netz-Stromkabel von Stromkabelhalterung
(1) entfernen u. Stromkabeldose (2) vom
Kabelstecker (3) abziehen.
2.
Stromkabel (3) von Gebläseeinheit
kommend aus der Halterung am Handgriff
entnehmen (
).
3.
Anschließend Steckdose an Klemmbügel (vor
Gebläseeinheit) befestigen (
).
4.
Beide Federriegel (rechts u. links am Gerät)
herausziehen, dabei etwas verdrehen und
wieder loslassen.
5.
Handgriff nach unten bewegen (
), damit
der HONDA-Stromerzeuger am Gerät
installiert werden kann.