Bediening
52400045 / 52400049
21 / 26
NL
16.
Beweeg de hendel naar beneden (
) tot de
gewenste werkhoogte is bereikt.
17.
Om de handgreep te vergrendelen, trekt u
beide veersluitingen (rechts en links van het
toestel) iets uit, draait u ze en laat u ze weer
los tot ze vastklikken.
18.
Schakel de vacuümopwekking in via de
drukschakelaar op de blaasinrichting (
).
19.
De lading (stenen plaat) wordt aangezogen
via de kabelstekker (met geïntegreerde
aan/uit-schakelaar) op de handgreep (
).
20.
De aanzuigplaat moet
altijd
volledig op de
lading (stenen plaat) zitten en aangezogen
worden.
De zuignap moet altijd in het midden op het
werkstuk worden geplaatst om een
gelijkmatige verdeling van de belasting te
garanderen. Indien de zuignap niet in het
midden is geplaatst, bestaat tijdens heffen
en dalen het risico dat de last plotseling naar
beneden valt als gevolg van een ongelijke
verdeling van de last.
Let op de manometer. Zodra - 0,2 bar
vacuüm is bereikt, kan de last worden
opgeheven.
In geen geval optillen voor die tijd, de lading
zou naar beneden vallen
.