probst 5220.0011, Руководство пользователя

Страница: 9 / 105

General
JUMBO-BV-VARIO-B
V2 26/07/16
8 / 40
3 General
3.1 Authorized use
The device ( JUMBO-BV-VARIO-B ) must only be used for lifting kerbstones and non-porous stone slabs with a
maximum weight of 150 kg (330 lbs) and is suitable for attaching to any type of wheel loader with a fork-lift carrier.
Prohibition
The use of the device ( JUMBO-BV-VARIO-B ) in closed areas or explosion and fire-endangered ranges is
forbidden (due to the petrol engine)!
Prohibition
●
The device is only designed for the use specified in this documentation.
●
Every other use is not authorized and is forbidden!
●
All relevant safety regulations, especially regulations of the declaration of conformity, and
additional local health and safety regulations have to be observed.
Only suction plates of the manufacturer PROBST shall be used!!!

Some suction plates which can be mounted to the device will reduce its carrying capacity.
The maximum load is indicated on each suction plate.

Use only suction plates which are approved for this device!

Do not exceed the maximum carrying capacity of the suction plates!!!
Danger: Load (stone slabs) will fall down!
The use of this device is only permitted in proximity to the ground.
The Load must not be lifted above 1,8 m (70,8 inch)!
The use of suction plates with a smaller carrying capacity than the lifting unit is forbidden!
Danger: Load will fall down.
(It is permissible to use suction plates with a higher carrying capacity than the lifting unit)

The load (stone slabs) which is to be sucked and
transported, must have sufficient inherent stability,
otherwise there is
risk of breakage when lifting!

Stone slabs must not be bend when lifting - especially take
care with thin and large-sized stone slabs!

Generally, the load (stones slab) is only to be sucked in the
middle , otherwise the load hangs diagonally under the
device and the load could break - especially when lifting
large stone slabs with a small suction plate.

Standard suction plates are not suitable for the transport of
glass plates!