Proactive NJ1 e-assistant, Руководство по сборке

Страница: 4 / 40

Usage instructions Adapter & Adaptation
3
1 Preface
Dear Customer,
Congratulations on purchasing your new
PRO ACTIV product.
Please note that these usage instructions /
assembly instructions are simply an addition to
your usage instructions for the wheelchair and
adapted product (hereinafter referred to as the
product). Read the usage instructions for your
wheelchair and product – in particular all of the
safety advice – carefully before using the
wheelchair product traction system.
You will find below some information on the
correct and safe use of the adapter. Please
read these instructions before using the wheel-
chair product traction device. There is also
some assembly information in these instruc-
tions that is primarily aimed at rehabilitation
specialist dealers in order to ensure that they
assemble the products correctly.
If you have any further questions about this or
any of our other products, we would be glad to
be at your disposal.
Enjoy your trips and the best possible mobility.
Your PRO ACTIV team
2 Legend
The symbols used in these usage instructions
have the following meanings:
Manufacturer
Note
3 General
PRO ACTIV differentiates between the central
adapter and the front adapter. The central
adapter is mounted under the wheelchair seat
on the folding mechanism or on the cross
tubes. In contrast, the front adapter must be
mounted on the front frame tubes of the
wheelchair.
The adjustments on the adapter and product
must be made by rehabilitation specialist deal-
ers so that when the product is coupled, the
wheelchair steering wheels are raised 30 mm
to 50 mm above the ground.
For loading, transportation or in tight spaces,
the adapter can be removed from the wheel-
chair in a few moves without tools and can
then be stowed away.
As with all new devices, it takes time to get
used to adapting the product on the wheel-
chair. If necessary, a trained assistant should
observe the correct adaptation process initially
so that they are able to provide assistance if
required.
The product may only be adapted and
detached on dry, stable and flat surfaces.
For NJ1 e-assistant: The drive may only
be switched on after completing the adaptation
process. The product may only be adapted
when the drive signal transmitter is inactive in
order to avoid unintended drive signals.
Assembly work, for example centring
semi-shells and centring columns on the
wheelchair or necessary adjustment work on
the adapter and product, may only be con-
ducted by your rehabilitation specialist dealer
or PRO ACTIV.
Note: PRO ACTIV produces adapters, centring
semi-shells, and centring columns in various
designs, for example as a complete individual
part or made from separate parts. Illustrations
in these usage instructions may therefore vary
from the holders mounted on your wheelchair.