Proactive NJ1 e-assistant, Руководство по сборке

Страница: 25 / 40

Usage instructions Adapter & Adaptation
24
Figure 79: Inserting the insertion bolt of the docking
plate in the insertion shaft on the steering head
Figure 80: Insertion bolt inserted into the insertion
shaft on the steering head
Now hold down the product's brake and use
the grip rings on your wheelchair to move in
the direction of the product. This lifts the front
of the wheelchair and places the contact areas
of the adapter and docking plate against each
other. This process is only completed when the
grid mechanism has clicked into place with an
audible locking noise.
Figure 81: Press the product's brake and move
towards the product with the grip rings until it clicks
into place
Hint: If the surface is very smooth, it is benefi-
cial to hold the product against a wall or other
fixed barrier until the grid mechanism is
stopped via a clearly audible locking noise.
The eccentric clamp lever must then be
pressed to clamp (downwards). Finally the
securing bolt must be inserted into the planned
drill hole until the locking sphere of the secur-
ing bolt is locked in the drive direction to the
right outside of the docking plate or the right
outer side of the docking plate is visible. Only
in this position may the product be operated on
the wheelchair.
Figure 82: Adapter is adapted and ready for opera-
tion
Figure 83: Securing bolt with locking sphere, locking
sphere locked on the right outer side of the docking
plate
Note: You can watch a video on how to adjust
the adapter to the wheelchair on YouTube:
Locking sphere
Direction of
travel
Securing bolt inserted
Eccentric clamp
lever pushed to
"clamp"