Proactive NJ1 e-assistant, Руководство по сборке

Страница: 16 / 40

Usage instructions Adapter & Adaptation
15
Figure 45: M6 setting screws resting on the steering
head connection
6 Front adapter
The following instructions are intended
for and may only be carried out by a rehabilita-
tion specialist dealer or PRO ACTIV.
The product is attached via one of the adapters
adapted on the wheelchair's front frame tubes.
Figure 46: Front adapter on the front frame tubes
6.1 Assembly work on adapter
The adapter is supplied with standard settings
from the factory depending on the product's
wheel size. The default settings can be viewed
in the table in Chapter 10. If the product is to
be adapted to a third party product or a PRO
ACTIV wheelchair with special dimensions,
changes may still need to be made to the set-
tings. Potential changes stating the dimensions
can also be taken from the table in Chapter 10.
The width of the front adapter must then be
modified to the width of the wheelchair. To
achieve this four M6 tensioning screws on
each side (Metric size 5 mm) must be loos-
ened. By then screwing in all four M4 threaded
screws (Metric size 2 mm), the clamp is
opened and the clamps on the steering head
connection can be moved to the side.
Figure 47: Clamp steering head connection and M6
tensioning screws
Figure 48: M4 threaded pins to open the clamp to
move the clamp steering head connection to the
side
The distance of the two frame clamps must
now be adapted to the distance of the frame
tubes on the wheelchair. The distance of the
frame clamps must be centred so that the
steering head is positioned in the middle.
Clamp steering
head connection
M6 tensioning screws
M4 threaded pins between
the tensioning screws
M6 adjustment screws