Proactive NJ1 e-assistant, Руководство по сборке

Страница: 34 / 40

Usage instructions Adapter & Adaptation
33
Standard setting for 24'' and 26'' wheel
Clamping plate
holder
Clamp cover
Clamp steering
head connec-
tion
Steering head
connection
Default setting
Wheel 24‘‘ / 26‘‘
Clamp cover high
assembly posi-
tion Angle adjustment
directed 7.5°
upwards
Holder drill for
clamp cover as-
sembled low;
tensioning
screws directed
backwards
High position;
steering head
connection up-
wards
Additional setting
options for third
party products or
special dimen-
sions
Assembled in the
middle or down,
each -25 mm to
default setting
Pointed down-
wards +30 mm to
default setting;
angle balance on
frame 15° to front Assembled high
-70 mm to default
setting; tension-
ing screws back-
wards
Pointed down-
wards -35 mm
to default set-
ting
The clamp cover is available in different lengths:
•
Standard: 80 mm
•
Extended lengths: 110 mm, 170 mm
Tension screws
backwards
Clamping plate
holder
Clamp cover
Clamp steering
head connection
sloped up and
backwards
Clamp steering
head connection
Holder drill hole
for clamp cover
assembled low
Clamp cover
high in clamping
plate holder and
7.5° upwards