1 2
3
4
5 6
Installation
Customer Helpline: 0845 600 4632
Unpacking your washing machine
Caution:
2 people are required
to unpack the washing machine,
it is recommended that gloves are
worn.
a:
Carefully remove all packaging materials
including the foam base, dispose of correctly.
Note:
When opened, water droplets may be
visible in the drum etc. this is normal as each
appliance is factory tested.
Removing the packing bolts
Important:
The packing bolts are
designed to support the internal
components during transit, these
MUST
be removed before use.
a:
Loosen the screws by rotating
counterclockwise with a suitable wrench.
(1 & 2)
b:
Remove the bolts by pulling them.
(3)
c:
When
the transport bolts have been removed,
insert the plastic transport screw taps found in
the accessories bag into the holes.
(4)
Removing the packing bolts
a:
For your machine to work efficiently with
minimum vibration it should be settled on flat,
non-slippery, firm ground.
b:
You can adjust the balance of your machine
by changing the positioning of its feet.
c:
First, loosen the plastic adjustment nut.
(5)
d:
Adjust by rotating the feet upwards or
downwards.
(6)
e:
After the desired position has been reached,
tighten the plastic adjustment nut again by
rotating it upwards.
Note:
Never put cartons, wooden blocks or
similar materials to balance the machine on
uneven ground.
4
Содержание A105QS
Страница 19: ...18...
