8
7. While another person holds the Console (6)
near the Upright (3), connect wires on the
Console to the Upper Wire Harness (32) and to
the pulse wires (A, B).
Tip: Avoid pinching the wires.
Insert the
excess wires downward into the Upright (3).
Attach the Console (6) to the Console Bracket
(55) with four M4 x 16mm Screws (40).
See step 5.
Tighten the M4 x 16mm Screw (40).
7
6. Orient the Console Bracket (55) as shown.
Insert the Upper Wire Harness (32) and the right
and left pulse wires (A, B) through the Console
Bracket (55).
Tip: Avoid pinching the wires.
Attach the
Console Bracket to the Upright (3) with two M8
x 25mm Patch Screws (50).
6
55
55
40
50
6
32
32
A, B
A, B
3
3
Avoid pinching
the wires
Avoid pinching
the wires
8. The Console (6) requires four 1.5V D batteries
(not included); alkaline batteries are recom-
mended.
IMPORTANT: If the exercise bike
has been exposed to cold temperatures,
allow it to warm to room temperature before
inserting batteries into the Console. If you
do not do this, the console displays or other
electronic components may become dam-
aged.
Press the tabs on the battery cover and
remove the battery cover. Insert four batteries
into the battery compartments;
make sure that
the batteries are oriented as shown by the
diagrams inside the battery compartments.
Then, reattach the battery cover.
6
Batteries
Batteries
Battery
Cover
8
