19
5. FINE SETTING OF THE TEMPERATURE/POWER
If the controller is in automatic mode, the desired values of the temperature change in cycles by pressing the button 2
Temp / Fire
for temperature /
power. As you keep the button pressed for 2 seconds, the selection screen will appear (see Fig.5). From this screen you can change the desired value of the
temperature in steps of 1°C, from the minimum value 5°C to the maximum value 35°C of the room temperature.
Fig. 5
If the controller is in manual mode, the button 2
Temp/Fire
changes in cycles the desired value of the power on the display in cycles. If you hold this
button pressed for 2 seconds, the selection screen of the power appears (see Fig.6). From this screen you can change the desired value through 1 step, in
intervals of 1 up to the maximum value.
Fig. 6
In both cases described above, the value of the upper line flashes, so that the user understands that it can be changed. The buttons
4 (+)
and
2 (-)
increase or decrease the value, while button 3
OK
saves the new value, the display returns to the selection screen.
When you press button 1
ESC
, the SELECTION screen returns on the display without saving the new value. As you press button 5
ON/OFF
the display
returns to the home screen without saving the new value.
6. ECO MODE
The function ECO is an economical mode in which the fireplace operates automatically at time intervals. The operating time and the idle time are set by
the user.
7. ADVANCED FUNCTIONS
By pressing button 3
Menu
you reach “Advanced functions”. On the bottom line the name of the function is shown, which at the moment is displayed. On
the top line the indicated value is shown. If no value appears on the top line, the message is displayed on the bottom line in a submenu, which you can access
by pressing button 3
SETTING
.
The arrow keys allow you to search through the various options in the menu.
Whether or not a value is displayed on the top line, in order to change the indicated function, you must press the button 3
SETTING
to change this value.
The value shown on the upper line begins flashing in order to inform the user that he can change it. Both bottom buttons can be arrows or they can be changed
in
+/-
depending on the type of data which are displayed. They are used to increase or decrease the value of the data. The new value is confirmed by the key
OK
. Then the display returns to the previous screen.
Fig. 7
In the table 2 various functions are listed in the same order as they appear on the display, together with their values.
Table 2 – List of the functions
*This function is seen only if the fireplace is on.
8. DATE AND TIME MENU.
The available functions are listed in Table 3, in the same order as they appear on the display, together with their values.
Table 3 – List of the functions in the date and time menu
Function Value
Water Temp.
40
÷
80°Ñ
Day and Time
Chrono
Sleep *
Off / hh:mm
Settings
Technical menu
User Info
Warnings
Function Value
Hour 00
÷
23
Minutes 00
÷
59
Day Mo
÷
Su
Date 00
÷
31
Month 01
÷
12
Year 2010
÷
2109
