15
The fireplace functions together with a built and connected water heating installation (WHI), radiators etc. with installed heat power up to 16 kW. The WHI
is built by a specialized company when observing all local, national and European norms ensuring safety, functionality, comfortability and aesthetics.
For each room, which is going to be heated, the heat losses are calculated beforehand and depending on their size the power of the heating body is
chosen.
In the body of fireplace it is also provided a built-in highest effective and economical circulation pump class A, with consumption of electricity 5 W, up to
maximum 22W, which ensures the circulation of the heat carrier – water, or water with added propylene glycol for the operation of the whole heating system.
The fuel of the fireplace is wood pellets
ø
6mm/30mm. The quality of the pellets is of special importance. Regardless of the presence of certificate, some
of the pellets, which show various defects when burning: more ash, slag formation in the ash, low effectiveness and caloricity. It is not allowed to use other fuels
and waste.
The pellets are poured into a bunker and through an auger dispenser they are delivered in a specially designed steel basket (brazier, charcoal pan) for
burning, according to the chosen setting of the controller.
Initially the pellets poured in the basket are kindled automatically after starting by means of an electrical heating cartridge – a lighter, which thereafter the
program shuts down.
The air necessary for the burning enters in an organized way through the grate of the basket. It comes in a tube lead away on the back of the fireplace
with a possibility of sucking primary air outside the building.
The ash as a residue from the combustion of the fuel is collected in an ashpan, which has a capacity of 6,0 litres. When using quality pellets, that means
that the discharge of the ash can be done once monthly.
The flue gases are thrown out in the chimney by force by means of a built-in flue fan, controlled according to the settings made and the working mode.
A protection is provided against a stuffed broken chimney thereby the operation of the fireplace stops. In it the necessary factory and user settings for
operation have been programmed.
The overall operation of the fireplace is controlled smartly by a built-in electrical block – specialized controller.
The fireplace can also be controlled by infrared remote control.
For the purpose of protecting the health, the life and the property of the user the necessary protections have been provided, which stop the operation of
the fireplace on improper and predictably dangerous operation modes.
COMMON SAFETY. KINDS OF DANGERS
Attention:
Using and handling this appliance requires a definite minimum of acquired knowledge and skills.
All instructions which the producer has provided must be an important and essential part of this knowledge and skills, in order for it to be always at
consumer's disposal and obligatorily to be observed for the purpose of reducing all possible risks and dangerous consequences to a minimum or completely
avoiding them.
This appliance cannot be operated by children under 12 or by persons with decreased physical, sensory or mental capabilities, or insufficient experience
and knowledge, unless they are supervised or instructed about the safe operation of the appliance by the person responsible for their safety and understand the
dangers.
Children must not play with the appliance.
Cleaning and servicing of the appliance must not be done by unsupervised children.
In operation or idle time, you must make sure that the fireplace is in a safe condition.
The fireplace works only with a closed door of the firebox.
Don't allow the door of the fireplace to open when the fireplace operates and in the presence of fire. This can be dangerous.
During operation of the fireplaces some surfaces are heated to a high temperature and then accidental and unregulated touching heavy thermal injures
may occur.
During idle time obligatorily unplug the plug from the socket. Make sure that there is no power supply in the appliance.
No modifications in the appliance are allowed.
When a change is necessary, use obligatorily only original parts.
If the power cord is damaged, it must be replaced by the manufacturer or his service agent, or a similar qualified person, in order to avoid danger.
NORMS AND LEGISLATION
This fireplace has been produced in conformity and it corresponds the European norms:
ÁÄÑ EN 14785, ÁÄÑ EN 60335-1, ÁÄÑ EN55014-2, ÁÄÑ EN 55014-2, ÁÄÑ EN 61000-3-2 è ÁÄÑ EN 61000-3-3.
Installation and operation of the appliance must comply with all local, national and European norms.
RESPONSIBILITY
The producer bears no direct or indirect responsibility, civil or criminal responsibility when:
·
Non-observing the instructions
·
Non-observing normal safety rules
·
Improper operation of the appliance
·
Poor maintenance
·
Installation in discrepancy of the norms of the country
·
Installation by an unqualified and untrained personnel
·
Modifications and amendments which are neither regulated nor approved by the producer
·
Using unoriginal spare parts
·
Emergency events. Irresistible force (Force majeure)
INSTALLATION. INSTALLATION ON-SITE
The fireplace is suitable to be placed in the biggest central premise of the abode. The specific place is selected so that the following requirements shall be
considered and observed:
·
Close proximity to a chimney
·
Convenience to build a functional, compact and aesthetic water heating system (pipes, radiators and other elements).
·
Possibility to ensure outside air
·
Proper position and orientation so that it shall match the rest furnishing and for observation of the living fire.
·
It is not recommended to install the fireplace in a sleeping room or in a children's room.
·
Enough distance around the fireplace to ensure convenience in operation, maintenance, cleaning and prophylaxis.
