Prism Hardscapes Moderno 5, Инструкция по установке, эксплуатации и обслуживанию

Страница: 10 / 23

4. Take the control box and install the heat shield onto the pipe. To do this, thread the brass
pipe nut onto the burner orifice as far down as possible. Place the heat shield over the outlet
pipe of the control box and thread the orifice into the outlet pipe until tight. Use a wrench on
the burner orifice to tighten fully. Align the heat shield such that it fully shades the control
box and tighten the brass pipe nut enough so that the heat shield will not move.
5. Now, take the control box and install it onto the burner pipe, thread until fully tightened.
Align box so that the pilot hole is exposed and accessible to install the pilot assembly.
6. Turn the burner plate right side up and insert pilot assembly into the pan cutout with the
pilot hood slots facing the burner.
7. Align the two mounting holes over the two holes on the burner plate. Using the self-drilling
screws, secure the pilot burner assembly onto the burner plate.