Printronix P8000 Series, Руководство администратора

Страница: 131 / 422

LQ-1600K Emulation
131
20 CPI Condensed
Compressed print characters are narrower than the normal character set.
This is helpful for applications for which you need to print the maximum
amount of information on a page.
•
Enable (factory default). Prints about 60 percent of the width of normal
characters when compressed print is chosen by the host computer. For
example, a 12 CPI Draft font will compress to 20 CPI.
•
Disable . Does not compress print widths, even if condensed print is
chosen by the host.
Alt. Set 80-9F
•
Control Code (factory default). Interprets data in the range of hex 80
through hex 9F as a control code.
•
Printable . Prints data in the range of hex 80 through hex 9F.
Currency Sign (for GB and Kanji)
•
RMB Select (factory default). The ASCII code hex 24 is printed as a RMB
“¥” character in DBCS mode. Default for GB.
•
$ Select. The ASCII code hex 24 is printed as a dollar “$” character in
DBCS mode. Default for Kanji.
AR3240 (for GB and Kanji)
•
Disable (factory default). AR3240 emulation does not take effect. Default.
•
Enable. AR3240 takes effect, SUB (0x1A) is used as another SFCC. The
listed commands will take effect and turn the extending table character
on.
LQ-1600K Emulation