Printek PrintMaster 700 Series, Руководство пользователя

Страница: 58 / 126

49
2. Static assignment using the operator panel:
͎
Press < Setup >, then < Form >
.
͎
Press < Next > until the I/O selection appears. Select < I/O >.
͎
Press < Next > until the ETH-INT selection appears. Select < ETH-INT >, then< IP Addr >
͎
Enter the value for Octet 1by pressing < OCTET 1 >. Use the forward and backward
arrows to increment/decrement the number. When finished with each entry press
< Set > which will set the currently displayed value. To exit out without changing the value
press < Exit >. Enter the Octet 2 value in the same way, pressing < OCTET 2 >. To get to
Octet 3 and Octet 4, select < Next > and then select <OCTET 3> and < OCTET 4 >.
͎
Enter the default Gateway and Subnet mask in the same way. < Gateway > is available
from the screen you are returned to. Press < Next > to select < Subnet >.
͎
Enter the IP address get method under the selection <IP Get M>. Select <Static>.
3. BOOTP IP address assignment:
͎
Press <Setup>, then <Form>
.
͎
Press <Next> until the I/O selection appears. Select <I/O>.
͎
Press <Next> until the ETH-INT selection appears. Select <ETH-INT>.
͎
Press <Next> until the IP Get M selection appears. Select <IP Get M> Select <BOOTP>
͎
Obtain the Ethernet MAC address by printing the “Current Settings” configuration page,
Turn off printer.
͎
Configure your BOOTP server with desired IP address and MAC address.
͎
Turn on printer.
͎
Verify that the printer network interface received an IP address by printing the “Current
Settings” configuration page or in the operator panel menu.