manualshive.com logo in svg

Princeton GTIB-30, Руководство по установке

Поделиться
Скачать
Princeton GTIB-30 Скачать руководство пользователя страница 19

GTIB-30 Installation Manual-UL 

 

4411-0011, Rev 2.0 

 

19 

2.1  System Overview 

The GTIB-30 is an extremely versatile state of the art multi-port energy management 
converter system.  The GTIB-30 can be connected to batteries, solar PV arrays, and 
utility grids.  Unlike most conventional inverters and renewable energy systems, the 
GTIB-30 is designed to support and strengthen the utility grid instead of being a 
burden on it. It is therefore compatible with next generation smart and micro grids.  
These new power systems enable a much higher penetration of renewable energy 
than conventional inverter systems would allow and therefore the GTIB-30 helps to 

facilitate technical solutions to some of the world’s most urgent environmental 

problems.  

In an on-grid application, the loads connected to the GTIB-30 Load Port are supplied 
directly from the utility (as long as the grid is available).  When the GTIB-30

’

s DC port is 

configured for bi-directional  power exchange with a DC power source or DC energy 
system, it charges its batteries from the utility grid. When the batteries are full, the 
GTIB-30 supplies all of the energy to the loads. At any stage, the operator can request the 
GTIB-30 to provide additional energy and supplement the utility grid by feeding energy 
from the batteries into the grid. (See User Manual) When the DC Port is configured for 
PV operation, the GTIB-30 can draw power from a connected PV array and supply it to 
the loads or optionally export it to the grid. 

Additionally, the GTIB-30 also allows solar PV energy to be supplemented with 
combustion generators and other AC sources. 

2.1.1  Power Ports 

The GTIB-30 Inverter has one DC port (battery or PV) and one or two (optional) AC 
power ports (grid and load) giving the GTIB-30 a total of three power ports.  In this 
manual, the GTIB-30 is often symbolically represented by a diagonally divided 
square where one half represents the AC ports and the other half represents the 
DC port (battery or PV).  This symbolic representation of the GTIB-30 is shown in 
the center of Figure 1.   

2.1.1.1

 

DC Port 

The DC port can be either used for a battery bank or for connecting a PV array to the 
GTIB-30. The battery port is a two wire DC port used to connect a battery bank to 
the GTIB-30. The PV Port is a two wire DC port used to connect a PV array to the 
GTIB-30. 

1 

Содержание GTIB-30






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды