Princeton GTIB-30, Руководство по установке

Страница: 9 / 69

About this Manual
4411-0011, Rev 2.0 ix
Fuses:
For continued protection against risk of fire, only use replacement fuses of the
same type and rating as the original fuse. Replacing of fuses should be done by
knowledgeable and trained personnel only.
Tipover:
Tip over hazard. Do not move this equipment without mechanical
assistance.
Safety Check
Performing a routine safety check before energizing the Inverter will minimize the
risk of injury to the operator and minimize the potential for damaging the unit.
Before operating the unit, check for obvious signs of damage or concern. The
following is a list of suggested items to be checked before operating the unit:
1. Check the enclosure for obvious signs of damage.
2. Verify that all inlet and outlet vents are clear of debris.
3. Check external wires and cables for signs of damage, such as fraying or
cracked insulation.
4. Check room for potential hazards, such as standing water on the floor or on
the GTIB-30 Inverter.
Note:
Additional safety checks may be necessary depending on the particular
installation of the unit. The safety checklist above is not intended to be all-inclusive.
Resolve all issues before operating the inverter. Contact Princeton Power Systems if
necessary.
Terms of Use
Because of the wide variety of uses for power electronics equipment, this manual
does not describe every possible application or configuration. All technicians
responsible for installing, commissioning, and operating this equipment must satisfy
themselves of the suitability and proper implementation of the intended application of
this power conversion product.
In no event will Princeton Power Systems, Inc., its subsidiaries, partners, employees,
or affiliates be responsible or liable for any damages, indirect or direct, resulting from
the misuse or incorrect application of this equipment.
The examples and diagrams in this manual are for illustrative purposes only.
Because of the wide variety of uses, applications, peripheral equipment, and facility
configurations particular to each installation, Princeton Power Systems, Inc. cannot
assume responsibility or liability for actual use based on the information provided
herein.