Princeton GTIB-30, Руководство по установке

Страница: 5 / 69

About this Manual
4411-0011, Rev 2.0 v
Organization
This manual is organized into five chapters and two appendices.
Chapters
Chapter 1
Introduction
welcomes the user and provides background information
about the GTIB-30 Inverter and Princeton Power Systems.
Chapter 2
System Overview and Configurations
provides general information
about the GTIB-30 and introduces several of the important system components.
This section can also be found in the user manual of the GTIB-30.
Chapter 3
Pre-Installation
provides important information regarding enclosure
transport, placement and dimensions.
Chapter 4
Wiring Instructions
contains instructions on how to wire up the
GTIB-30.
Chapter 5
Commissioning Sequences
provides a non-exhaustive wiring checklist
and commissioning sequence for the GTIB-30 inverter.
Appendices
Appendix A provides the technical specifications of the GTIB-30.
Appendix B , “Return Material Authorization, Product, and Contact Information”
This chapter provides instructions for obtaining a Return Material Authorization,
if the product needs to be returned to Princeton Power Systems or one of its
authorized service centers.
Abbreviations and Definitions
The following table provides a glossary of technical terms used in this manual. The
glossary also defines some common electrical terms and acronyms that may be used
in this manual.
Abbreviations Definition
AC Alternating Current
ATS Automatic Transfer Switch
BMS Battery Management System
CEC California Energy Commission
DC Direct Current
DPDT Double Pole Double Throw
ESD Electro-Static Discharge
GFDI Ground Fault Detector and Interrupter
GTIB Grid-Tied Inverter and Battery Controller
HMI Human/Machine Interface
I/O Input/Output