Princeton GTIB-30 Скачать руководство пользователя | Manualshive

Страница: 40 / 69

background image

GTIB-30 Installation Manual-UL

40

4411-0011, Rev 2.0

4.3 External disconnect and overcurrent protection requirements

For safe installation, operation and maintenance, it is required that external
disconnect switches and overcurrent devices be installed on all ports of the GTIB-30
(See Table 3 for required ratings). It is highly recommended that all disconnect
switches are installed in a single neat enclosure or bypass box in close proximity to
the GTIB-30 inverter.  All switches inside the bypass-box should be appropriately
labeled and the necessary warning labels must be included.  Circuit breakers can be
used as disconnect switches.  These then provide both over current protection and
also function as disconnect switches.

DC disconnect switches must be used on the DC ports. External overcurrent
protection is required for Battery or PV operation. See Table 3 for ratings.

4.3.1 AC Disconnect switch requirements

The external disconnect switches on the utility grid and load port as well as any
bypass switches need to break all phases and leave the neutral unbroken to be fully
compliant with NEC requirements.

4.3.2 DC Disconnect switch requirements

The DC port (battery or PV) must be equipped with external two pole devices that
enable disconnection of the DC source or load. In most cases, the combiner box of
the PV array will provide this capability for the PV port. Many battery banks will
also provide a disconnect device in which case another external disconnect device on
the battery port is not needed.

If the GTIB-30 is equipped with the optional GFDI, the external disconnect must
only break the ungrounded conductor. If the GTIB-30 does not have the optional
GFDI or there is an external GFDI installed it is up to the contractor / installer to
decide how to wire the disconnect as to not defeat the GFDI circuit.

Table 3: AC and DC Overcurrent Protection Rating Requirements

Connection

GTIB-208-30

GTIB-480-30

Grid Port

100A

50A

Load Port (if installed)

100A

50A

DC Port

150A

150A

«
...
38
39
40
41
42
...
»

Содержание GTIB-30






































































Отзывы:

Нет отзывов

Похожие инструкции для GTIB-30

Бренд: Forza Страницы: 13

Бренд: Trust Страницы: 45

Бренд: Eaton Страницы: 2

Thunder Shield TS500D

Бренд: OPTI-UPS Страницы: 7

Бренд: Eaton Страницы: 14

Бренд: CyberPower Страницы: 2

Бренд: CyberPower Страницы: 2

UPS5000-S-300 kVA

Бренд: Huawei Страницы: 172

UPS5000-A-400K-FTS

Бренд: Huawei Страницы: 12

Бренд: OXTS Страницы: 19

Бренд: Delta Страницы: 2

Бренд: Delta Страницы: 56

Бренд: Delta Страницы: 70

Ultron GES203HH33A035

Бренд: Delta Страницы: 70

Ultron DPS-300K

Бренд: Delta Страницы: 142

Бренд: Delta Страницы: 264

OnePower A03-S801

Бренд: Atlantis Land Страницы: 2

True On-Line Double Conversion UPS A03-OP6000-RP

Бренд: Atlantis Land Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды