background image

340-506-EN

5

Printed in USA 3/06 © 2006

Universal Rapid Toaster

340-TCE

Operation (continued)

NOTE: To cancel any operation in progress and release 
the bread product inside a chamber, press and hold the 
START button for 1.5 seconds, then release it to cycle 
the bun release doors.
A. Begin by loading bread into the top of the unit (see 

Loading Diagram on Page 6).

B. Press START button to toast the loaded product. The 

bread is toasted and discharged into the Buffered Bun 
Landing Zone (BBLZ).

TIP: During breakfast, place the UHC tray on the BBLZ, so 

that it is easier to load the product.

BREAKFAST LOADING
Whether you are toasting bagels or muffins, the loading 
process is similar.
A. Pre-split the breakfast product. This ensures that every 

bagel or muffin is toasted consistently.

B. Load the product with the cut site facing the outside 

heaters (cut side-out).

C. Press START button to begin the toasting cycle.

LUNCH LOADING
A. The toaster can be easily loaded from either side of the 

prep table. Load the buns so that the cut-side makes 
contact with the grey platen (cut side-in). There is a 
separate slot for the club/flatbread section that allows 
toasting on both sides.

B. Press START button to begin the toasting cycle.

NOTE: The walls may move out during the cycle. This is 
normal; it helps to retain the shape of the bun.

BUZZ SOUND
A buzz is heard when product is caught in the release gate. 
It also may be heard at the end of the toast cycle. This sound 
is normal and the toaster is operating normally.

3

CHANGEOVER
The URT needs 20 minutes for temperatures to stabilize at the new set points while transitioning from breakfast to lunch. Since 
most stores will be using two URT units locked together, one suggested procedure is:
A. Toast additional product of the lower volume breakfast items and hold in UHC.
B. Convert one toaster to buns at 10:10 AM, so that it is ready to toast buns for lunch. Keep the other toaster in its current 

breakfast mode, so you can continue to sell the higher volume sandwich.

C. Convert the other toaster at 10:30 AM and then begin using it at 10:45 AM.
NOTE: There is no transition time going from BAGEL to MUFFIN or vice versa.

4

Содержание 340-TCE



















Отзывы: