If you have questions or issues please contact 1-866-429-7566 for expert assistance.
_______________________________________________________________________________________
Please visit
www.PrimoWater.com
for more useful information, instructional videos, tips and special offers.
Page |
11
REPLACING EMPTY WATER BOTTLE
When your bottle needs to be replaced, the empty bottle icon will flash orange to
alert you. Replace with a full water bottle as soon as possible.
Notice: For your safety, this dispenser is programmed to not dispense water if the
indicator light is blinking.
1.
Open dispenser door.
2.
Slide empty bottle out of cabinet.
3.
Slide probe up from empty bottle but do not remove until all water stops
dripping from bottle. Once dripping has stopped, place probe on hanger.
4.
Place fresh bottle outside of cabinet. Remove entire plastic cap from top of
bottle. Clean outside of new bottle with a cloth.
5.
Place probe into bottle. Slide down until it clicks in place. Water will begin to
pump to chilling tank and within one minute the empty indicator light will stop
blinking. Dispensing of water can resume.
6.
Slide bottle into cabinet and close door.
