If you have questions or issues please contact 1-866-429-7566 for expert assistance.
_______________________________________________________________________________________
Please visit
www.PrimoWater.com
for more useful information, instructional videos, tips and special offers.
Page |
3
FEATURES & FUNCTIONS
Cold Dispense Control -
Touch sensitive. Blinking ring and snowflake indicator
dispenser is chilling water. Snowflake and ring light up blue when dispensing.
Empty Bottle Indicator
- Blinks orange to alert you water bottle is empty.
Spout
- Cold water comes out here. Silver coating helps kill bacteria.
Bottle Support
– Helps align sports bottles and glasses with spout to eliminate
spills.
LED Nightlight
– Located behind bottle support. Helps in low light.
Full Tray Indicator
– Red float warns when tray needs to be emptied.
Drip Tray –
Collects spills. To remove and empty, lift upward.
Probe
– Located inside cabinet. Connects to bottle to allow water to be pumped
into cold tank.
Probe Hanger
– Located inside door at top. For best results, place probe here
when not in use.
Water Bottle
– Not included. Uses 3, 4 or 5 gallon round or rectangular bottles.
Visit PrimoWater.com to find Primo Water at a store near you.
Nightlight Switch
– Flip blue control to ON to activate nightlight.
Cold Water Switch
– Flip green control to ON to activate chilling of water.
Water Flow Switch
– Flip red control to ON to activate flow of water from
dispenser to brewer. (Warning – Follow all directions before activating.)
Water Supply Line to Brewer
– Insert to connector provided with brewer.
(Warning – Follow all directions before activating.)
Power Cord –
Plug only into 110v ground fault interrupting receptacle.
Drain
– Remove cap and plug to empty all water from the cold tank for
transportation or cleaning.
Stability Base –
Helps reduce tip over. Notice - Do not operate this dispenser
without stability base properly installed.