Primes FocusMonitor FM+, Руководство по эксплуатации

Страница: 33 / 56

FocusMonitor FM+
35,0(6
33 Revision 03/2019 EN
11.4.5 Traversing the axes ( Device control > Advanced > Move axes )
1. Enter the desired z-position of the
measuring tip into the entry field
numerically.
• As an alternative, you can set the z-
position on the slide control.
2. Click on the Move to z-position
button.
• The measurement tip is positioned at
the selected position.
Move to the determined focus
You can also move to the determined
focus of a caustic that has already been
recorded if, for example, you want to
measure a similar beam. During this
process, the z
0
value of the Invariant mo-
ments algorithm is used:
1. Choose a caustic for this in the proj-
ect tree (see separate operating man-
ual of the LaserDiagnosticsSoftware
LDS).
2. Then click on the Move to focus of
selected caustic button.