Primes FocusMonitor FM+, Руководство по эксплуатации

Страница: 14 / 56

FocusMonitor FM+
35,0(6
14 Revision 03/2019 EN
6 Transport
NOTICE
Damage/Destruction of the device
The device’s axes and carriers may be damaged if the device is subjected to hard shocks or
is allowed to fall.
X
Handle the device carefully when transporting or installing it.
X
Only transport the device in the original PRIMES transport box.
We recommend removing the measuring tip and placing it in the enclosed plastic case.
7 Installation
7.1 Safety instructions
Areas on the device that could be particularly hazardous for hand injuries are marked with the following pic-
togram:
Hand injuries warning
CAUTION
Risk of injury caused by rotating parts
The measuring tip of the FocusMonitor FM+ rotates at high speed during the measuring
operation. Even after the motor has been turned off, the measuring tip will continue to rotate
for a certain amount of time.
X
Do not reach into or hold any objects into the beam entrance of the measuring device (see
Fig. 7.1 on page 15).
X
After the motor has been turned off, wait until the measuring tip comes to a complete stop
(pay attention to the status display on the connection side).
CAUTION
Risk of crushing
Unlike the housing, the measuring head of the FocusMonitor FM+ can move along the z- and
y-axis.
X
Do not reach into the movement range of the measuring head (see Fig. 7.2 on page 15).