Primes FocusMonitor FM+, Руководство по эксплуатации

Страница: 28 / 56

FocusMonitor FM+
35,0(6
28 Revision 03/2019 EN
11.3 Connect the FocusMonitor FM+ with the LaserDiagnosticsSoftware LDS
11.3.1 Connect device
1. Switch on the FocusMonitor FM+.
The operating mode is shown in the
status display (see chapter 10 on
page 25).
2. Start the
LaserDiagnosticsSoftware LDS.
3. Click on the Devices tab.
4. Click on the + Connect to device
button under the tab.
The
Connections
window appears.
5. Click on the desired device.
6. Click on the
Connect to device
but-
ton.
11.3.2 Change the network address of a connected device
Proceed as follows in order to assign a dif-
ferent IP address to a connected device:
1. Right-click on the device and select
the
Device settings
menu point.
2. Enter in the desired IP address or
use the
Use DHCP
option and con-
firm the entry with
OK
.
3. Turn the FocusMonitor FM+ off and
on again.