Creating Discs 45
Kiosk Mode
Kiosk Mode will allow you to increase the capacity of your
Bravo from 25 to 50 discs by dispensing finished discs out the
front of the unit instead of dropping them to the output bin.
This allows you to place blank discs in both the input and
output bins doubling your capacity. An optional Kiosk Kit is
available from your Primera reseller that contains a custom
output bin to catch the finished discs as they leave the Bravo.
This setting will be overridden by the Kiosk Mode setting in
Discribe's Robot Write or Job Details Pane.
Print Quality
There are four options for image quality. Keep in mind that
Normal 600 provides the fastest print at lower quality while
Ultra Photo 4800 delivers the best quality at a slower print
speed.
PrimaColor™
Click on this Check box to enable PrimaColor color matching.
The PrimaColor profiles were written specifically for the Bravo
to give a precise color match when attempting to print
photographic images. If you
are using a third-party color management system, disable
PrimaColor.
Intensity
The Intensity setting will control the amount of ink saturation
on the disc. When printing onto the Primera ToughCoat discs,
50% is usually sufficient. When printing on to other brands of
media, or if you would like to print darker colors, you may
wish to increase the Intensity setting. Please note that higher
ink saturation could result in discs not drying instantly. Also,
higher intensity will result in higher ink usage causing a lower
yield of discs per cartridge.
510930.qxd 11/25/2009 2:19 PM Page 45
TOC
INDEX
