1. Processor bowl:
The processor bowl ‘A’ sits on locating pegs as shown in the picture. The
lid is fitted as shown then turned anti-clockwise so that the interlock tag (A4) slots into the
safety interlock slot (1).
Important
The capacity of the processor bowl is 1.1 litres. Never
exceed the maximum fill level marked on the side of the processor jug.
2.
The
grating/slicing disk
(B) must be attached to the spindle (B1) before putting them over
the shaft in the processor bowl. Note that the grating/slicing disk (B) is reversible. When
fitting the disk to the spindle push it in firmly then turn the spindle slightly to lock it into place.
Take care when handling the disks – the blades are very sharp.
Fit the lid as shown &
use either the pulse settings or speed 1 for chipping or slicing, speed 2 for shredding.
Always use the food pusher (A1) to gently force food through the grating/slicing blade.
