AdvAntAge - digitAl vAv diffusers
PRODUCT OVERVIEW & INSTALLATION INSTRUCTIONS
11
acutherm.com
|
ACUTHERM ADVANTAGE - Manual
Advantage thermostat Options (continued)
1. LCD screen for menu display
2. Menu Button
3. Increase and decrease push
buttons for day temperature
setpoint adjustment
4. Motion sensor allows for automatic
detection of occupancy
5. Service Port – Linker connection
lCd tHerMOstAt W/MOtiOn sensOr: PiC-ts-MOtiOn
1
3
2
4
5
1. LCD screen for menu display
2. Menu Button
3. Increase and decrease push
buttons for day temperature
setpoint adjustment
4. CO2 sensor allows for
automatic purge mode
5. Humidity sensor allows for monitoring
6. Service Port
*Note: Requires connection to
Master diffuser and additional
connection of separate 24VAC supply
power for CO2 measurement.
Base (Receiver) Mounted in Plenum
1. LCD Screen for menu display
2. Increase and decrease push
buttons for day temperature
setpoint adjustment
3. Service Port - Linker Connection
4. Menu Button
Remote (Transmitter) User Thermostat
1. Dial Adjustment for Temperature
2. LED – 1 blink cooling mode,
2 – heating, 3 – neutral
3. Occupancy Override Button
4. Service Port
lCd tHerMOstAt W/CO2 And HuMiditY: PiC-ts-CO2H
Wireless diAl tHerMOstAt: PiC-ts-Wireless
1
3
2
4
1
3
2
4
1
3
2
6
•
The LCD Thermostat with Motion Sensor is powered
from the controller and has a variety of features.
•
This model measures room temperature, features
an LCD screen with day Setpoint adjustment, and
motion sensor with lighting control.
•
Set point limits can be adjusted using the thermostat
or, with BACnet option, over the BACnet network.
•
The LCD Thermostat with Motion Sensor can be
used as a balancing tool for the Intelligent Controller
system by simply connecting the RJ-45 cable to the
back of the thermostat.
•
This thermostat can also be used as a motion sensor
and enables the
Unoccupied Mode
(minimum
damper position) when no motion is detected. It also
has the capability to act as a lighting controller for
occupied/unoccupied schedules.
•
The LCD Thermostat with CO2 and Humidity is
powered from the controller and has a variety of
features.
•
This model measures room temperature, features an
LCD screen with day Setpoint adjustment, CO2 and
Humidty sensing.
•
Set point limits can be adjusted using the thermostat
or, with BACnet option, over the BACnet network.
•
The LCD Thermostat with CO2 and Humidity can be
used as a balancing tool for the Intelligent Controller
system by simply connecting the RJ-45 cable to the
back of the thermostat.
•
This thermostat can also be used to sense CO2 and
enable the
purge mode
in the Advantage diffuser.
•
This thermostat can also be used to sense Humidity
and can be monitored over the BACnet network.
•
The Wireless Thermostat System provides both
sensor inputs and a point of control for Acutherm
controllers.
•
The System consists of 2 units:
•
Wireless Remote T-Stat - Transmitter - Room sensor
T-Stat with dial setpoint adjust, LED and push button.
•
Wireless Base - Receiver - Unit with LCD and 3 push
buttons.
•
REMOTE T-STAT and BASE units talk between each
other wirelessly in the 2.4GHz range (FCC and IC
certified). BASE unit connects to main controller using
the supplied NETC35 (35ft plenum rated CAT 5 cable
with RJ 45 connectors) cable. No other connections
are required.
•
Set point limits can be adjusted using the Base
(receiver) or, with BACnet option, over the BACnet
network.
