PRG BEST BOY Скачать руководство пользователя страница 90 | Manualshive

Страница: 90 / 100

PRG BEST BOY Скачать руководство пользователя страница 90

82

BEST BOY

®

HP SPOT LUMINAIRE USER MANUAL

Best Boy HP Spot Luminaire

SOURCE:

HTI 1500W/D7/60 Lamp

OUTPUT: 31,000

lumens

POWER DRAW:

Max. 10.5A at 208V, 8.75A at 240V. Auto-sensing voltage input range is 200-240V, 50/
60HZ

REFLECTOR:

Precision glass reflector with cold mirror coating.

ZOOM RANGE:

8:1 from a tight spot of 8° to a very wide flood of 64° maintaining focus throughout.

BEAM SIZE CONTROL:

In addition to the zoom optics, a mechanical iris provides continuous beam size control
for both rapid changes and smooth, timed beam angle changes.

FRAMING:

Four-blade framing system featuring four independent blades mounted in two planes.
Each blade can be /- 30° and the entire frame system can be r/- 60° for a
total travel of 120°.

DIMMING:

Gray-scale glass dimmer for full-field dimming from 0% to 100% with accurate slow-
speed control and fast bumps.

STROBE:

Servo-powered, lightning fast strobe wheel.

EFFECTS:

One (1) multiplying four-facet prism, two (2) glass effects, and variable frost.

COLOR:

CMY color system featuring three (3) crossfading color wheels of Cyan, Magenta, and
Yellow, plus one (1) designer wheel with seven (7) user-changeable color filters.

COLOR TEMP CONTROL: Adjustable color temperature wheel, range from 3,000K all the way up to 7,500K.

Includes an integrated minus green filter.

ROTATING GOBOS:

Two (2) indexable, rotating gobo wheels with six (6) gobos per wheel. Gobos are
individually calibrated so the unit will automatically index the orientation of each gobo
regardless of initial placement. Both gobo wheels accept PRG Moiré Gobos™ for
advanced gobo rotator effects.

OPERATING TEMP:

-20° to 120°F (-29° to 49°C)

CONTROL:

Compatible with all PRG consoles and a wide variety of DMX512 and Art-Net consoles.

DMX CHANNELS:

45 DMX512 channels required per unit.

ETHERNET BYPASS:

A relay allows Ethernet signals to pass through daisy-chained luminaires even if power is
removed.

ON-BOARD CONTROL:

Built-in LCD touchscreen display allows for on-board fixture control and feedback. On-
board battery power allows for the fixture address and configurations to be set without
having to apply AC power to the luminaire.

PAN & TILT:

Three-phase, high-speed servomotors. Brakes are applied when off.

RANGE:

Pan - 615°, Tilt - 260°

POSITIONING:

Can be mounted in any orientation.

SPACING:

Hangs on 33 inch (838 mm) centers when Light Shield is extended.
Hangs on 28 inch (711 mm) centers when Light Shield is not extended.

WEIGHT:

109 lbs (49.44 kg) without hooks.

«
...
88
89
90
91
92
...
»

Содержание BEST BOY





































































































Отзывы:

Нет отзывов