PRG BEST BOY Скачать руководство пользователя страница 2

Страница: 2 / 100

AutoPar®, Bad Boy®, Best Boy®, Followspot Controller™, Mbox®, Mini Node™, Nocturne®, Series 400®, ReNEW®, Super Node™,

V476®, V676®, and Virtuoso® are trademarks of Production Resource Group, LLC, registered in the U.S. and other countries.

All other brand names which may be mentioned in this manual are trademarks or registered trademarks of their respective companies.

This manual is for informational use only and is subject to change without notice. Please check www.prg.com for the latest version.

PRG assumes no responsibility or liability for any claims resulting from errors or inaccuracies that may appear in this manual.

Best Boy® HP Spot Luminaire User Manual

Version as of: March 25, 2015

PRG part number: 02.9817.0001

Production Resource Group, LLC

Dallas Office

8617 Ambassador Row, Suite 120

Dallas, Texas 75247

www.prg.com

Best Boy® HP Spot Luminaire User Manual

Содержание BEST BOY





































































































Результаты поиска

Содержание BEST BOY

Отзывы:

PRG BEST BOY, Руководство пользователя, Страница: 2 / 100

Результаты поиска

Содержание BEST BOY

Отзывы: