CONTROLS/INSTRUMENTS
2 - 13
Service brakes are applied by depressing the
brake pedal, the rate of braking varying accor-
ding to the gradual increase of pressure until the
required rate of braking is obtained. When brake
pedal is depressed, vehicle stoplights automa-
tically light up.
Accelerator Pedal
Controls engine rpm.
Note:
Pedal will be inoperative when the
DDEC-
TEST
switch in steering compartment is in the
ON
position.
Tilt Steering Wheel and
Telescopic Steering
Column
18180
To unlock, use the handle located on the
steering column's left hand side. Pull handle
down to permit a maximum variation of 12
°
in
steering wheel angle, and a telescopic wheel
movement of 2" (5 cm). Push handle up to lock
both mechanisms.
Warning:
Never try to adjust
the steering wheel
while the vehicle is in motion; wheel could move
unexpectedly, making you lose control of the ve-
hicle.
Seats
Driver's Seat - "Delivery"
The driver's "delivery" seat is standard, and legal
only for driving the vehicle on its initial delivery. It
is a conventional van seat equipped with tracks
for fore and aft adjustments.
Driver's and Copilot's Seats -
ISRI
(optional)
Two distinct
ISRI
model driver's and copilot's
seats may be supplied with your vehicle: both
with a sophisticated air suspension system, one
being manually-operated, while the other is
electrically-operated. Both seats may be
equipped with lumbar supports, heated cushions
and adjustable armrests. Seats can be adjusted
to the desired driving position by following the
instructions listed below:
18026
Warning:
Never try to adjust seat while driving
vehicle as this could result in loss of vehicle
control.
1. Armrest
Rotate control knob to select desired arm-
resting angle. When not in use, raise armrest
parallel with backrest.
