4
Ray 7R Moving Beam – User manual
SAFETY
INST
R
UCTION
S
o
The projector needs to be positioned so that the projection surface is at least
12 meters away from the lens of the projector.
o
The projector must be positioned so that it is at least 0.2
metres away from
flammable objects.
Do NOT mount the fixture on flammable surfaces.
o
Do not operate the projector if the ambient temperature exceeds 40° C
o
This fitting has an IP20 protection
rating;
it is not waterproof.
o
The projector must be connected
to a
power supply system fitted
with an
efficient earthing line (Class I appliance according to standard EN 60598
-
1)
o
A qualified electrical installer is required to connect the projector to the main
electrical source.
o
Ensure that the main frequency and voltag
e of the power source corresponds
with projector (according to the electrical data label)
o
The maximum temperature that can be reached on the external surface of the
fitting in a
thermally
steady state is 100° C
o
Before
starting any
maintenance work or clean
ing the projector, disconnect
from the main power supply.
o
After switching off, do not remove any parts of the fitting for at least 35
minutes to avoid getting burnt.
o
The fitting is designed to hold in any splinters produced by a lamp exploding.
The lense
s must be mounted and, if visibly damaged, they have to be replaced
with genuine spares.
o
Carefully read the ‘operating instructions’ provided by the lamp manufacturer
before operating the lamp. Immediately replace the lamp if it is damaged or
deformed.
o
T
he products referred to in this manual conform to the European Community
Directives to which they are:
o
Low Voltage 2006/95/CE
o
Electromagnetic Compatibility 2004/08/CE
Содержание RAY 7R
Страница 1: ...RAY 7R MOVING BEAM USER MANUAL ...
