Prestige RAY 7R, Руководство пользователя

Страница: 17 / 19

17
Ray 7R Moving Beam – User manual
5 . TROUBLE SHOOTING
Problem Suggestions
The bulb wont light
up
A. Bulb has not cooled down completely because of improper
operation. First, cool the fan inside the light body for 10 minutes, and
then switch off the power for another 5 minutes. After all the inner
parts have returned to a normal temperature, restart th e power.
B. The inner temperature is overheated and has activated the
overheat protection mode. Check if the fan and air hole are blocked.
C. Check if the bulb has expired. If so, change the bulb
D. Check if it has a leakage, detachment, or poor connection
between the bulb and trigger wire.
E. Check whether the fan speed is abnormal or damaged on the
panel menu
F. The ballast has been damaged
G. Service voltage is insufficient.
The bulb has
become dim
A. The bulb may have expired. If so, change the bulb.
B. Check if the optical parts are clean
C. Conduct a routine maintenance check to the bulb and other
inner parts
The motor is not
working.
A. Check whether the power is the correct voltage and the fuses have
not burnt out
B. Check whether the motor wire and connecting wire are damaged
C. Check whether the fastening flange screw is loose or blocked.
D. Check whether the plug-in on the PCB and IC components is
loose, has poor connection or is damaged.
E. Check whether the power output voltage suitable
F. Motor or PCB is damaged