EN • 3
ENGLISH
FRANCAIS
NEDERLANDS
ESP
AÑOL
IT
ALIANO
DEUTSCH
WHO SHOULD READ THESE INSTRUCTIONS
These instructions should be read by:
- the specifying engineer
- the installer
- the user
- the service engineer
SYMBOLS
The following symbols are used in this manual:
• The parts may only be replaced by genuine factory parts. You
will find a list of the spare parts and their reference number
ACV to the end of this document.
• The burners are preset in our factory for use with natural
gas
[equivalent to G20].
• An ajustement of the CO2 is not allowed in Belgium I 2E(s)B.
• It is important to switch the boiler off before carrying out
any work.
• There are no user accessible parts inside the boiler casing.
APPLICABLE STANDARDS
The appliances carry the
CE
mark in accordance with the
standards in force in the various countries (European Directives
92/42/EC
“Efficiency”,
90/396/EC
“Gas appliances”). They
also carry the “
HR-TOP
” label (Gas condensation boilers).
WARNINGS
IF YOU SMELL GAS:
- Immediately shut off the gas intake
- Open windows for fresh air flowing
- Do not use any electrical appliances and do not actuate any
switches
- Immediately notify your gas supplier and/or your installer
This documentation is part of the information delivered with the
appliance and must be given to the user and stored in a safe
place!
An approved installer must carry out the assembly, commissioning,
maintenance and repair of the system, in accordance with current
standards in force.
ACV shall not accept any responsibility for damage caused by non-
compliant location of the system or by use of the parts or
connections not approved by ACV for this application.
The manufacturer reserves the right to change the
technical characteristics and specification of its
products without notice.
The availability of some versions and their accessories is
market dependant.
WARNINGS
RECOMMENDATIONS
• Please, read carefully this manual before installing and
commissioning the boiler.
• It is prohibited to carry out any modifications to the inside of
the appliance without the manufacturer’s prior and written
agreement.
• The product must be installed and serviced by trained
engineers, in compliance with current standards.
• Any failure to follow instructions relating to tests and test
procedures may result in personal injury or risks of pollution.
• To guarantee safe and correct operation of the appliance, it
is important to have it serviced and maintained every year by
an approved installer or maintenance company.
• In case of anomaly, please call your service engineer.
• Despite the strict quality standards imposed by ACV during
the manufacture, inspection and transport of its appliances,
you might notice some errors. Please report immediately any
fault to your approved installer. Remember to note the fault
code displayed on the screen.
Danger of burns
Essential instruction for
the safety of persons
and the environment.
Danger of electrocution.
Essential instruction for
the correct operation of
the installation.
Содержание AquaSpeed 24
Страница 35: ......
