PreSens Fibox 4 trace, Инструкция по эксплуатации, Страница: 73 / 79

68
© 2013 PreSens Precision Sensing GmbH
Fibox 4 & Fibox 4 trace Operational Notes
1. Put the bend relief, clamping nut, and collet chuck over the cable of your temperature
sensor.
2. Strip the wire; preferably tin the strands.
3. Solder the wires to the insert contacts according to pin-out.
4. Form part of the shielding into a strand and tin it, then solder it to the insert contact
according to pin-out.
Fig. 87
Fig. 88
Fig. 89
Fig. 90