VPM
Installation Instructions
Visit the Premier Mounts website at www.mounts.com
Page 9
Installing the Adapter Plate (cont’d)
200 x 100mm
Attach the VESA Adapter Plate to the back of the
flat panel using six (6) M4 flat head screws
(Figure 1).
See Figure 2 for a clearer view of the 200mm x
100mm pattern (marked
B
).
M4 Flat
Head
Screw
Universal
Spacer
Adapter
Plate
Flat-
Panel
200mm x 100mm Mounting Pattern
Installation
If using a 200 x 100mm mounting pattern
to attach the VPM to your-flat panel, you must
use six (6) M4 flat head screws. Using pan
combo screws for the 200mm x 100mm VESA
plate may damage your flat panel.
Proceed to the
“Attaching the Flat-Panel to the
VPM Mount”
section.
If you have a recessed mounting pattern, use
the universal spacers to compensate for the
indentation.
B
Figure 1
Figure 2
B
B
B
B
B
Optional fixed tilt adapters not shown.
