VPM
Page 10
Visit the Premier Mounts website at www.mounts.com
Installation Instructions
Attaching the Flat-Panel to the VPM Mount
Choose one of the following options.
Are you attaching the VPM directly to the flat-panel, or
are you using an adapter plate?
•
If
directly to the flat-panel,
insert
four (4) M4 x 10mm screws through the VPM
attachment head and 100 x 100mm pattern of
the flat-panel (see page 14) (Figure 1).
•
If
using an adapter plate,
insert
four (4) M4 x 5mm screws through the VPM
attachment head and 100 x 100mm pattern of
the adapter plate (see page 14) (Figure 1).
Do not overtighten the mounting hardware.
Proceed to the
“Attaching the VPM Mount to a Pole”
section.
Use four (4) M4 x 6mm pan combo screws to attach the
VPM attachment head to the fixed tilt adapters (Figure 2).
Proceed to the
“Attaching the VPM Mount to a Pole”
section.
No Fixed Tilt Adapters
Using Fixed Tilt Adapters
Figure 1
Drawings not to scale.
Optional fixed tilt adapters not shown.
Mounting
Hardware
VPM-200
Flat- Panel
Figure 2
Flat-Panel
and/or
Adapter Plate
M4 x 6mm pan
combo screw
-200
