VPM
Page 8
Visit the Premier Mounts website at www.mounts.com
Installation Instructions
Installing the Adapter Plate (Optional)
What is the VESA pattern on your flat-panel?
•
If
75 x 75mm
or
200 x 200mm,
proceed to the
75 x 75mm or 200 x 200mm
section.
•
If
200 x 100mm,
go to the
200 x 100mm
section on page 9.
•
If
100 x 100mm,
go to the
“Attaching the Flat-Panel to the VPM Mount”
section on page 10.
The adapter plate has a 100mm x 100mm VESA pattern, but that is only for attaching the plate to the
attachment head of the VPM.
75 x 75mm or 200 x 200mm
Attach the Adapter Plate to the back of the flat panel
using the appropriate mounting hardware.
If you are using M4 or M5 screws, you must
also use M4 or M5 washers.
Figure 1 shows a flat-panel using the
200mm x 200mm pattern. See Figure 2 for
the 75mm x 75mm pattern (marked
E
).
Go to the
“Attaching the Flat-Panel to the VPM
Mount”
section.
Mounting
Hardware
Universal
Spacer
Adapter
Plate
Flat-
Panel
If you have a recessed mounting pattern, use
the universal spacers to compensate for the
indentation.
E
E
E
E
Figure 1
Figure 2
Washer
Optional fixed tilt adapters not shown.
