VPM
Page 6
Visit the Premier Mounts website at www.mounts.com
Installation Instructions
Opening the Collar Clasp
Remove the M8 x 40mm hex screws from the sides of
the VPM to open the collar clasp and begin installation.
Proceed to the
“Installing the Fixed Tilt Adapters
(Optional)”
section.
M8 x 40mm Hex
Screw
Installing the Fixed Tilt Adapters (Optional)
Are you using fixed tilt adapters for an additional
10° of tilt?
If
Yes,
choose an option:
•
If
mounting
directly to the flat-panel,
insert
four (4) M4 x 10mm screws from behind the
front holes of the fixed tilt adapters and into
the 100 x 100mm pattern of the flat-panel
(see page 14).
•
If
using an adapter plate,
insert
four (4) M4 x 5mm screws from behind the
front holes of the fixed tilt adapters and into
the 100 x 100mm pattern of the adapter plate
(see page 14).
If
No,
go to the “
Selecting the Mounting
Hardware
” section.
Do not overtighten the mounting hardware.
You can also attach the fixed tilt adapters upside
down, i.e., for an upward tilt on a floor stage
monitor stand.
Proceed to the
“Selecting the Mounting Hardware”
section.
Flat-Panel or
Adapter Plate
M4 x 10mm or
M4 x 5mm screw
