manualshive.com logo in svg

Premier Mounts PTFM3765, Руководство по установке, Страница: 9 / 20

Поделиться
Скачать
Premier Mounts PTFM3765 Скачать руководство пользователя страница 9

PTFM3765 

Installation Instructions 

Visit the Premier Mounts website at http://www.mounts.com

 Page 

9

X

X

Installing the Wall Plate (cont’d)

Step 2

 Two people are recommended for this step; one 

person to level the wall plate and another person to 

mark the wall stud location.

Place the wall plate against the wall in the desired 

viewing location.

Align the bottom of the wall plate with the pencil 

mark you made for Distance C.

Adjust the wall plate to align the mount slots in the 

wall plate with the center of the wall studs. 

Level the wall plate.

Use a pencil to mark the right-hand mounting 

location along the exact center of the wall stud.

If you will be installing your PTFM3765 mount to wood 

studs, proceed to the 

“Wood Stud Installation”

 

section.

If you will be installing your PTFM3765 mount to 

a concrete surface, proceed to the 

“Concrete 

Installation”

 section.

If you will be installing your PTFM3765 mount to steel 

studs, proceed to the 

“Steel Stud Installation”

 section.

Determining the Mounting Surface

Wo

od

 

Stud

Conc

rete

Steel 

Stud

Wood Stud Installation

 You must secure the wall plate to two (2) wall studs 

using two (2) lag bolts; one (1) lag bolt anchored 

through each wall plate section for each stud found.

Use a stud 

fi

 nder to determine the exact center of 

wall studs in the vicinity of the wall plate. 

Use a pencil to mark the exact center of each of the 

wall studs. 

Step 1

Distance C 

Pencil Mark

X

X

Содержание PTFM3765





















Отзывы:

Нет отзывов