Premier Mounts PTFM3765 Скачать руководство пользователя страница 16

Страница: 16 / 20

PTFM3765

Page 16

Visit the Premier Mounts website at http://www.mounts.com

Installation

Instructions

Universal Washer Installation

Flat Panel

Universal Washer

Universal Spacer

Mounting Bracket

Mount Point

Mounting Screw

Premier Mounts’ Universal Washers are designed to

accommodate the various M4, M5, M6 and M8 hole sizes

required by

at panels.

Do not place excessive pressure on the back of the

at panel, as this may damage your

at panel.

The Universal Washer must be installed between the

head of the mounting screw and the mounting bracket

as shown.

Does your

at panel have:

●

Power or data connections which face the wall?

●

Recessed mounting points?

●

Uneven mounting points?

●

A curved back?

●

Any obstruction near the mounting point?

, skip to the

“Mounting Bracket Installation”

section.

Yes

, you must install Universal Spacers. Remove the

mounting brackets, Universal Washers, and mounting

screws from the back of the

at panel. Proceed to the

“Universal Spacer Installation”

section.

Universal Spacer Installation

Premier Mounts’ Universal Spacers allow you to attach

the mounting bracket to

at panels which have recessed

or uneven mounting points. Each Universal Spacer adds

to the distance between the mounting bracket and

your

at panel.

The Universal Spacers must be stacked and oriented

as shown.

The Universal Spacers must only be installed

between the mounting bracket and your

at panel.

The Universal Spacers will

t M4, M5, M6 and M8 screw

sizes.

There must be suf

cient space between your

panel and the wall for power and data connections. If

your

at panel has power or data connections which

face the wall, you need to use either a suf

cient

number of Universal Spacers to allow connections to

be made, or use the provided 90° HDMI connectors

and cable.

Power or data connections which improperly force

your

at panel away from the wall without the use of

Universal Spacers or the supplied HDMI connectors

will prevent safe installation of your

at panel.

Proceed to the

“Mounting Bracket Installation”

section.

M5, M6

Mounting Hardware Installation (cont’d)

Содержание PTFM3765





















Результаты поиска

Содержание PTFM3765

Отзывы:

Premier Mounts PTFM3765, Руководство по установке, Страница: 16 / 20

Результаты поиска

Содержание PTFM3765

Отзывы: