
PTFM3765
Page 18
Visit the Premier Mounts website at http://www.mounts.com
Installation
Instructions
Installing the Mounting Bracket (cont’d)
Attaching the Flat Panel to the Wall Plate
Attaching the Mounting Bracket to the Flat Panel
Two people are required for this step.
When mounting the
fl
at panel to the wall plate, the
fl
at panel must be completely parallel to the wall for correct
engagement of the mounting brackets.
Lift the
fl
at panel, keeping the
fl
at panel parallel to the wall.
Place the back of the mounting brackets against the front of the wall plate.
Slide the
fl
at panel downward while keeping the mounting brackets pressed against the wall plate.
Engage the mounting hooks of the mounting brackets onto the wall plate.
You will hear an audible “click” as the spring-loaded securing latches lock the mounting brackets to the wall plate.
Gently push the
fl
at panel to the wall.
Adjust and cut the braided nylon pull cord and secure the pull tab. The pull tab should extend no less than 1" from
the bottom of the mounting bracket.
Do not release the
fl
at panel until both mounting hooks of the mounting brackets are secure on the wall plate.
Place your
fl
at panel screen-side down on a soft,
fl
at
surface.
Identify the number and location of the thread
inserts on the back of your
fl
at panel.
Aligning the holes on each mounting bracket with
the thread inserts on the back of your
fl
at panel.
Secure each mounting bracket to your
fl
at panel by
inserting a minimum of two (2) screws per bracket.
Do not overtighten the mounting hardware.
Proceed to the
“Attaching the Flat Panel to the Wall
Plate”
section.
X
X