manualshive.com logo in svg

Premier Mounts PTFM3765, Руководство по установке, Страница: 17 / 20

Поделиться
Скачать
Premier Mounts PTFM3765 Скачать руководство пользователя страница 17

PTFM3765 

Installation Instructions 

Visit the Premier Mounts website at http://www.mounts.com

 Page 

17

If the vertical distance between the upper and lower 

mounting points on your 

fl

 at panel is greater than 16", 

then you will need to attach the mounting bracket 

extensions to the mounting brackets.

Mounting bracket extensions add up to 9.75" to the 

length of the mounting bracket.

Place your 

fl

 at panel screen-side down on a soft, 

fl

 at 

surface.

Place the mounting brackets on top of the 

fl

 at panel 

with an upper mounting point visible through an 

upper mounting slot.

Place the mounting bracket extensions on the 

mounting bracket.

Insert two (2) M4 x 5mm screws into each mounting 

bracket extension (one (1) per mounting point).

Repeat 

 through 

 for the remaining mounting 

bracket extension.

Proceed to the 

“Attaching the Mounting Bracket to 

the Flat Panel”

 section.

 Is the lower mounting point visible through one of 

the mounting holes?

If 

No

, slide the mounting bracket extension until a 

mounting point becomes visible through a mounting 

hole. Proceed to 

.

If 

Yes

, proceed to 

.

This section presumes that you have read and 

understood these sections:

 

●

Selecting the Mounting Hardware

 

●

Universal Washer Installation

 

●

Universal Spacer Installation

 Use a tape measure to measure the distance 

between the top and bottom mounting points.

Is the distance greater than 16"?

If 

No,

 skip to the 

“Attaching the Mounting Bracket 

to the Flat Panel”

 section.

If 

Yes,

 proceed to the 

“Mounting Bracket 

Extension Installation”

 section.

Mounting Bracket Installation

Mounting Bracket Extension Installation

Mounting Point

Mounting Hole

Mounting Bracket

Bracket Extension

Flat Panel

Содержание PTFM3765





















Отзывы:

Нет отзывов